You are here: Home » News » product News » What should I do if the LED flood light fails to light up?

What should I do if the LED flood light fails to light up?

Views:0     Author:Site Editor     Publish Time: 2020-08-13      Origin:Site

What should I do if the LED flood light fails to light up?

LED flood light

LED floodlights, also known as LED floodlights, spotlights, projection lights, spotlights, etc., are mainly used for architectural decorative lighting and commercial space lighting. The decorative components are heavier and their appearance is round. There are also square ones, because the different reasons for heat dissipation and application environment should be considered, so other shapes of floodlights only have some differences in shape, in fact, the principles are the same. If you want to know how to deal with a broken LED flood light, you must first understand the most basic structure of the floodlight

Project-light lamps have to consider the heat dissipation and application environment. Therefore, other shapes of project-light lamps have some differences in appearance, but the principles are the same. LED floodlights are mainly LED light source (also known as LED lamp beads), LED power supply (also known as LED driver), shell, waterproof gasket and water-proof glue. LED light source, the driving quality is excellent, the waterproof is well done, the shell is thick enough to meet the heat dissipation of the light source and the power supply, and there is basically no problem with the flood light. So, what if the LED flood light is broken, does not light up, flashes, sometimes bright, or slightly bright? I will tell you how to repair and replace it today.

The LED flood light is broken. It is mainly the light source and driver, and the most important thing is that the light source and power supply are not good. Check it with a tool to know that it is broken. The reasons why the LED flood light does not turn on are:

1. The power supply is broken and no electricity: the lamp is broken basically is the power supply, and the power supply provides a constant current working voltage for the light source. Often, the power supply is broken when many floodlights are broken. The power supply has a problem in the process of converting AC power to DC power, which may cause the LED flood light to not light up and flash. Generally, there is no way to repair it, only to replace the power supply; the other reason is that the power supply is good, and the performance is rigid. At the beginning, the floodlight can be on for a while and then start to flicker. This is mainly because the heat of the lamp beads can not be dissipated, which leads to flashing all the time. The fundamental problem is that the shell does not disperse the lamp beads of the light source. First, check whether the shell reaches 50g/w. Standard, in addition, check whether the light source and the housing are well connected, and whether the thermal paste is evenly applied. If the power supply is broken, try another power supply to see if the light is still off. If it does not light up, then the problem is not necessarily the power supply. Another reason is the large temperature difference between winter and summer in some areas, resulting in the power supply operating temperature is too high or too low, unable to operate stably, objectively speaking, this power supply is not qualified. If the power supply is broken, change it to a better one, and the quality will not work if one power supply does not last for two or three years.

2. The light source is broken and does not turn on: Generally, the floodlight uses integrated lamp beads. Check if there is a black spot in the middle of the lamp bead sealing position. This black spot is caused by two reasons, the first long time use , The temperature of the lamp beads is formed by the high temperature of the glue and the phosphor. Another reason is that the current of the power supply is too high, which is caused by the open circuit or necrosis of the lamp beads. In addition, the floodlight is not waterproof properly, water has entered the lamp, causing the lamp beads to burn out, the chip life is not long, and the quality is not good. The poor heat dissipation of the cast light source will also cause the light source to decay (simply speaking, it is not bright before) or burn out. If the shell is intact, it can be used to replace the lamp beads, but you need to know the series and parallel of the power supply and match the series and parallel of the light source.

3. Welding of the wire solder joints causes no electricity: the integrated lamp beads in the flood light are connected to two wires, whether the lamp beads are soldered, false soldered, or cold soldered, whether the power input wire has loose connections or open circuits, etc. , Check whether the connecting wire of the drive is damaged.

In short, the main reasons for the LED flood light not to light up and flashing may be voltage instability, the quality of the lamp beads, and the quality of the power supply. Since the LED flood light is driven by a constant current, the converted DC voltage is relatively low. Therefore, the problem of voltage instability can basically be ignored, so the cause of the LED floodlight does not shine and flashes is the quality of the lamp beads and the quality of the power supply.

Finally, LED floodlights are all high-power LED products. Good-quality manufacturers will undergo strict aging tests before leaving the factory to ensure that they are good products in the hands of consumers. No manufacturer of electronic products can guarantee 100% failure. If there is a problem, you should contact the manufacturer in time for after-sales service. The warranty of the floodlight is at least 2 years. If you buy a cheap floodlight and use it for half a year, if there is a problem within 1 year, the manufacturer will basically not I'll take care of you, because cheap floodlights use poor materials, cost reduction, and high after-sales costs, manufacturers will lose money, so no matter what electronic products, after-sales service is very important, remember!

The floodlight is broken, can I repair it myself?

The LED flood light can be repaired, but it cannot be repaired by non-professionals. It is recommended to find a professional manufacturer of LED lights to help repair it. Of course, most companies are reluctant to repair, because repairing a lamp is more troublesome than producing one! It is recommended to buy lamps of better quality when you usually buy lamps, of course, better quality will be more expensive! Good lighting manufacturers will guarantee 2-3 years.


Contact Us


Company: Electronic Technology Co., Ltd. Shandong Seaman
Address: Linyi City, Shandong Province, Linyi City III Accelerator fourth floor of Applied Sciences
Mail: sdximan001@163.com
Phone: 0539-8293686
Phone: 86-18206398266
Fax:0539-8297916

All Navigation

all rights reservedShandong Seaman Electronic Technology Co., Ltd.  Technical Support: e-qilai