You are here: Home » News » product News » What is the difference between ordinary lighting fixtures and LED explosion-proof lighting fixtures?

What is the difference between ordinary lighting fixtures and LED explosion-proof lighting fixtures?

Views:3     Author:Site Editor     Publish Time: 2020-06-09      Origin:Site

What is the difference between ordinary lighting fixtures and LED explosion-proof lighting fixtures?

First of all, the difference between ordinary fluorescent lamps and LED fluorescent lamps is the same in size and caliber as traditional fluorescent lamps, with lengths of 60cm, 120cm and 150cm, and their powers are 10W, 16W and 20W, respectively, while 20W traditional fluorescent lamps (inductive ballast Practical power consumption is about 53W, 40W traditional fluorescent lamp (inductive ballast) practical power consumption is about 68W; that is to say, their seat prices are the same, which is convenient when changing the time-sharing procedure.


    So what are the specific advantages of LED fluorescent lamps? There are eight main points


    1. Environmentally friendly lamps and lanterns to maintain the earth


 Traditional fluorescent lamps contain a large amount of mercury vapor, which will evaporate into the atmosphere if broken. However, LED fluorescent lamps basically do not use mercury, and LED products do not contain lead, which plays a role in maintaining the environment. LED fluorescent lamps are recognized as green lighting in the 21st century.


 Second, efficient conversion, reduce fever


Traditional lamps produce a lot of heat energy, and LED lamps convert all electrical energy into light energy, which will not form a waste of energy. And for documents, clothing will not fade.


    Third, the light is mild and the eyes are maintained


The traditional fluorescent lamp uses alternating current, so it will produce 100-120 strobes per second. LED lamps convert AC power directly into DC power without flickering and maintaining eyes.


    Four, noisy and warm, no noise


LED lamps do not generate noise, so it is a good choice for places where fine electronic instruments are used. Suitable for places such as libraries and offices.


    5. No UV rays, no mosquitoes


LED lamps do not produce ultraviolet rays, so there are not many mosquitoes coiled around the lamp source like traditional lamps. The room will become more and more clean and tidy.


    Sixth, consolidate reliable, durable use


The LED light uses epoxy resin rather than traditional glass in detail. It is more solid and reliable. Even if it hits the floor, the LED will not be damaged casually, and it can be used with confidence.


    Seven, voltage adjustable 80V-245V


The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops. The LED lamps can be lit within a certain range of voltage, and the brightness can be adjusted.


    Eight, consolidate and reliable, durable use


The LED light uses epoxy resin rather than traditional glass in detail. It is more solid and reliable. Even if it hits the floor, the LED will not be damaged casually, and it can be used with confidence.


Contact Us


Company: Electronic Technology Co., Ltd. Shandong Seaman
Address: Linyi City, Shandong Province, Linyi City III Accelerator fourth floor of Applied Sciences
Mail: sdximan001@163.com
Phone: 0539-8293686
Phone: 86-18206398266
Fax:0539-8297916

All Navigation

all rights reservedShandong Seaman Electronic Technology Co., Ltd.  Technical Support: e-qilai