Views:1 Author:Site Editor Publish Time: 2020-09-16 Origin:Site
LED lighting has swept the traditional lighting market, and the same is true for various industrial fields. Gradually extend, gradually reduce, low maintenance costs... According to the US Department of Energy, LED lighting can save 190 TWh (1.9×1011 kWh) per year by 2030, which is equivalent to 15 billion US dollars. The most important thing is that the purchase price of lamps and luminaires continues to drop, making more and more equipment managers consider upgrading to LEDs.
Here are seven reasons to use LED high bay light:
1. Energy efficiency
Compared with traditional incandescent lamps, fluorescent lamps and fluorescent lighting indicators, the electricity used by LEDs is reduced by about 40-70%, thereby saving alternative energy costs. If in continuous lighting applications, the cost savings are even more substantial.
In addition, LEDs can emit light in a semicircle or in a specific direction, while traditional light bulbs emit light in a full circle or in all directions. The ability of LED to emit light reduces the waste of light and energy and further saves costs.
2. Long life
Unlike incandescent lighting, LEDs will not "burn out". After a time shift,LED high bay light will become darker and darker. The rated life of a good LED on the L70 is 100,000 hours, or at least 70% of the initial light output. Of course, this is specific to lamps and lamps. Because the LED system can reduce the cost of replacing the bulb, thereby reducing the overall maintenance cost.
Without filament or glass housing, LED lamps are resistant to breakage and can withstand vibration and other impacts, which means they are perfectly suitable for industrial environments.
Traditional lighting usually has glass or quartz on the outside, while LEDs are mounted on the circuit board and connected with lead solder (although lead solder is also afraid of direct collision, it is less than a smartphone).
4. Instant on function
For industrial applications, many fluorescent lamps and high-pressure gas discharge lamps cannot provide full brightness immediately, and it usually takes about three minutes to reach the maximum output. For reference, the LED system can immediately emit 100% brightness without restarting. , Put it basically in the power outage or early morning.
5. Fast cycle
If you want to consider including intelligent control in the building, then you must choose LED lighting.
6. The basis of information
LED high bay light is essentially compatible with advanced new systems and can bring comprehensive new energy efficiency. Using LEDs, facility managers can monitor performance to ensure cost savings and reduce the use of lighting in conjunction with other systems (including energy storage, solar and gas fire fighting technologies).
7. Almost no infrared or ultraviolet radiation
In practice, less than 10% of the power used by incandescent lamps is converted into visible light, and most of the power is converted into infrared (IR) or radiant heat. Excessive radiation and ultraviolet radiation (UV) force people and materials to cause injury, and if it is in an industrial environment that may contain hazardous chemicals, precision machinery, etc., it may cause danger.
The LED system hardly emits infrared or ultraviolet light. The rapid development of LED lighting technology has reduced costs and improved the reliability of LEDs.